Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Itchyfin · 05-28-2007, 01:47 AM

Just install an SAFC on my 89 S13 w/ SR. Before install car started like a champ everytime. I unhooked the white wire which is for the air fuel and connected it back to normal but nothing. There is a small click from the starter when I try to start it. Tried hot wiring the starter to the battery and still no crank. Fuel pump turns on. I BELIEVE I'm still getting spark. Cleaned the battery terminals and checked my grounds. Any ideas on why the car is not cranking? Please help!

05-28-2007, 01:47 AM	#1
Itchyfin Join Date: Sep 2006 Location: Bay Area CA. Posts: 28 Trader Rating: (0)	Car Wont Crank after SAFC1 Install Just install an SAFC on my 89 S13 w/ SR. Before install car started like a champ everytime. I unhooked the white wire which is for the air fuel and connected it back to normal but nothing. There is a small click from the starter when I try to start it. Tried hot wiring the starter to the battery and still no crank. Fuel pump turns on. I BELIEVE I'm still getting spark. Cleaned the battery terminals and checked my grounds. Any ideas on why the car is not cranking? Please help!