Quote:
Originally Posted by fliprayzin240sx
Where and how do you have the negative hooked up? Ive seen people actually connect it on the frame, some even used the spare tire retainer thing. Try connecting it to that after you strip the paint off the contact.
Double check the connections on the battery and make sure theyre clean. Also check the main power wire from the engine bay and make sure thats good.
|
I'll check it again when i get home from work today.
-I know the connections on the battery terminals as perfect, just redid the ends on them a couple weeks ago since the ground wire was a little loose on its connector to the terminal.
- I have the Ground connected to an existing grounding point in the trunk where the trunk latch is located, im sure its a ground for the tail lights.
- I did sand the spot around the existing ground hole so the connection is def good. And i mean it was working great in that spot, i cant think of why it would just randomly start giving me crap.
--I'll check the main power wire, but wouldn't that cause a few fuses to blow if the main wire was grounding out?
Thanks for the quick feedback guys!!