Quote:
Originally Posted by ecuastyle84
does it have to be welded?...cant i just remove the blades and put it together and plug up the second hole?
|
Yes. Doesn't have to be welded. Just make sure you seal the hole or it will leak. Also as someone mentioned above, you will have to find a hose that is large and then get reduced. I had that problem. Just took a heat dryer gun and then took some hose and use a needle nose the widen it. After a bit of doing so the end will remained widened. I been using my setup like this for about 7 months no problems, thats also with about 12psi of boost.