Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Water Temp Sender Radiator Hose Adaptor: correct size?

Luvs2slide · 06-27-2007, 02:56 PM

Here...

http://www.nissport.com/catalog/prod...e=Applications

This is the same one I have. Works like a champ and the best place to measure would be top right radiator hose if looking at the motor from the front of vehicle. Also remember, usually the guage itself, and the temp adaptor both have to be grounded. I would also use some teflon tape when you thread your sender into the adaptor to be safe. Autometer says not to use teflon tape because it wont ground itself. I've been running mine for like 6 months now no problems...

06-27-2007, 02:56 PM	#6
Luvs2slide Zilvia FREAK! Join Date: Oct 2006 Location: NW Florida Age: 43 Posts: 1,490 Trader Rating: (81)	Here... http://www.nissport.com/catalog/prod...e=Applications This is the same one I have. Works like a champ and the best place to measure would be top right radiator hose if looking at the motor from the front of vehicle. Also remember, usually the guage itself, and the temp adaptor both have to be grounded. I would also use some teflon tape when you thread your sender into the adaptor to be safe. Autometer says not to use teflon tape because it wont ground itself. I've been running mine for like 6 months now no problems...