View Single Post
Old 07-05-2007, 03:30 PM   #27
khmerguy618
Nissanaholic!
 
khmerguy618's Avatar
 
Join Date: Apr 2003
Location: 408 san jeezy CA
Age: 42
Posts: 2,001
Trader Rating: (11)
khmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfectionkhmerguy618 is close to perfection
Send a message via AIM to khmerguy618
Quote:
Originally Posted by charmersfh View Post
If only these will clear my S13 coupe..I would so be up for it.. 30mm wide rears + 30 mm wide fronts..lmk..cash in hand
depending on the coilovers you have the front will need a 15-20mm spacer (used a 20 and had it 10 -2 in the front on stock fenders and the tires cleared). The rears i'd suggest a 5mm plate spacer to clear the coilover or something like a 15 to make it flush, or just run less camber.

I had them on a 14 all stock body w/a roll in front and pull in the rear. The rears i had them just barely scraping the coilover and that was at around 4deg. of camber. I took them off and had my car aligned but i have other wheels to use now so i just cleaned them up and put them aside.

I can ship em by the end of the week if you're really interested.
__________________
Watch speed channel 12/9 @7.30PM for drifting at HIN!

[email protected]

IF you bought stuff from me write me a review HERE
||VEXMOTORSPORTS || DMAX-USA || RPS CLUTCH || BAB AUTOBODY||
khmerguy618 is offline