Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Could use some info on an rb swap into a 96 240 please

Tenchuu · 09-01-2007, 01:27 AM

RB26= 10K for the swap (has been done for about 8K) little fab
RB25= 5K for the swap (has been done for about 4K) no fab
LS1= 10K for the swap (has been done for 8K) and LOTS of custom fab.
SR20= can't say haven't researched it all out, no fab, I have heard it runs about the same as a SR with comparable bolt ons (FPR, one piece driveshaft, new radiator, fans and FMIC)
VG= don't do it
VQ=Look into it,a viable option but still new to the scene.

money is usually an issue so look at that, decide how much power and TQAA you want, and cross referance that with how much you want to spend then try again.

i would say RB25>SR for around the same price, and LS1>RB26 for about the same price, but all motors can be built with the right amount of money.

please spoon feed some to others when they ask the same question.

09-01-2007, 01:27 AM	#7
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8)	RB26= 10K for the swap (has been done for about 8K) little fab RB25= 5K for the swap (has been done for about 4K) no fab LS1= 10K for the swap (has been done for 8K) and LOTS of custom fab. SR20= can't say haven't researched it all out, no fab, I have heard it runs about the same as a SR with comparable bolt ons (FPR, one piece driveshaft, new radiator, fans and FMIC) VG= don't do it VQ=Look into it,a viable option but still new to the scene. money is usually an issue so look at that, decide how much power and TQAA you want, and cross referance that with how much you want to spend then try again. i would say RB25>SR for around the same price, and LS1>RB26 for about the same price, but all motors can be built with the right amount of money. please spoon feed some to others when they ask the same question.