Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

daryl337 · 09-13-2007, 08:59 AM

that looks correct to me, keep rotating the cams so they are tight and make sure you are on TDC, then all of the slack should be on the tensioner side of the chain, so after you put the tensioner on it will take the slack out of the cams.

To verify, instead of counting links, count pins. You should be 20 pins apart.

09-13-2007, 08:59 AM	#3
daryl337 Zilvia Junkie Join Date: Aug 2005 Location: Pac NW Age: 39 Posts: 589 Trader Rating: (1)	that looks correct to me, keep rotating the cams so they are tight and make sure you are on TDC, then all of the slack should be on the tensioner side of the chain, so after you put the tensioner on it will take the slack out of the cams. To verify, instead of counting links, count pins. You should be 20 pins apart. __________________ This is my clever and witty signature.