Those 2 pictures are from the same JDM manual. I know the LC-1 and LM-1 can duplicate a narrow band signal no doubt but what I am saying is the redtop ECU or for that matter any skinny o2 sensor ECU doesn't read like a common type fatty o2 sensor ECU, however both the fatty (Zirconia 95% common on a vehicles today) and skinny (Titania 5% common on all vehicles today if that).
Try calling Innovative and ask them what if you have a Titania based ECU that requires a skinny (o2 sensor/titania).
Here wikipedia explanes the difference of a few types of o2 sesnors:
http://en.wikipedia.org/wiki/Oxygen_sensor
and from another source thats explaines it here to:
http://www.aftermarketnews.com/defau...Text&item=5589
"Titania O2 sensors use a different type of ceramic and produce a different kind of signal than zirconia type O2 sensors. Instead of generating a voltage signal that changes with the air/fuel ratio, the sensor's resistance changes and goes from low (less than 1,000 ohms) when the air/fuel ratio is rich to high (over 20,000 ohms) when the air/fuel ratio is lean. The switching point occurs right at the ideal or stoichiometric air/fuel ratio. The engine computer supplies a base reference voltage (one volt or five volts, depending on the application), and then reads the change in the sensor return voltage as the sensor's resistance changes. Titania O2 sensors are only used on a few applications, including some older Nissans and 1987-1990 Jeep Cherokee, Wrangler and Eagle Summit."
I put the o2 sensor wiring diagram of both types Titania vs Zirconia up in a minute.
Titania Sensor
*Terminal C = Power Supply (battery voltage)
*Terminal B = Input Signal (to ECU/shielding grounded to engine)
*Terminal A = Ground (to body ground)
This is ODBI style connector RNN14 SR20DET for Titania Heated oxygen sensor;
Zirconia Sensor
*Terminal C = Power Supply (battery voltage)
*Terminal B = Input Signal (to ECU/shielding grounded to engine)
*Terminal A = Ground (to ECU)
This is OBDI style connector S14 SR20DET wiring diagram for Zirconia Heated oxygen sensor;
*
