Alrite here goes...in the first pic, the white connector is a plug that connects to the AT control unit..yahhh, so that is not nececsary...
Next, in the same pic, is a plug for both the eccs relay.
Wires, and what connectors they run to....
black wire w/white strip splice into 4 = ECU Pin 56/61 {ECCS RELAY N/O}
red wire w/black strip = ECU Pin # 4 {TO COIL IN ECCS RELAY}
red wire x2 spliced into 3?? =
-F4 PLug Pin 17 {power}
-ECU Pin 113/70 {113 is constant power 70=?}
A note on the black wire with white strip, is that once it splices into 4, 2 run into the rest of the engine harness and are black w/white strip with pink bands, while the other 2 both go to either pin on the ECCS/ECU, and are still just black and white stripped.
Ref =
http://www.240sx.org/faq/articles/95_ecu_pinout.htm
I found it on the net, and i it is the property of 240sx as far as i know....