[Sleepur]

well I was working on my car yesterday and I put a new clutchmaster clutch and aluminum flywheel in it. replaced the throwout bearing and everything. put the tranny back together took it for a test drive and as I was backing out I felt a really bad stutter. problem #1 Problem #2 as I was test driving it I went through the gears shifting at about 3000rpm got to 5th gear at about 65mph. slowed down and downshifted to 4th and hit the gas and had a really bad stutter with almost no power barely any acceleration. I have taken this transmission out 2 times in the past 2 days trying to figure out what the heck is wrong. please if you have any ideas please help me out.

I sent the clutch and flywheel back to clutchmaster thinking it was a defective clutch because after about 30miles of driving there were blue hot spots on the pressure plate and flywheel. :/

any info is much appreciated