Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Dream240 · 10-19-2007, 03:56 PM

No, pulling is caused by bad caster not bad toe. And yes the teniosn rod sets the caster, but since the OEM rods are not adjustable the caster will never change unless the car is damaged.

The measurement I'm talking about is not the tire to fender clearance(ride height), I'm talking about the gap in between the wheel and the wheel well in the front and back of the tire. You'll get two measurements per front tire.

The backs aren't a concern at this point. Oh an BTW the rear wheel ride height is WAAAY to high, what do you have for mods in the back?

10-19-2007, 03:56 PM	#15
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8)	No, pulling is caused by bad caster not bad toe. And yes the teniosn rod sets the caster, but since the OEM rods are not adjustable the caster will never change unless the car is damaged. The measurement I'm talking about is not the tire to fender clearance(ride height), I'm talking about the gap in between the wheel and the wheel well in the front and back of the tire. You'll get two measurements per front tire. The backs aren't a concern at this point. Oh an BTW the rear wheel ride height is WAAAY to high, what do you have for mods in the back? __________________ Don't mess with my monkey...he's loaded.