Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - help with tranmission removal-seems like its stuck

turbo240sx · 11-26-2002, 04:56 PM

your not the only one that had this problem. the easiest way i did it was drain the fluid. turn it upside down and the pull out while pushing up too. you need 2 people. the starter hump on the bell housing wont clear the underside of the body on an s-13 if you pull it out in the upright position. its a pain in the ass. wait till you put it back in its even more fun. do it the same way, good luck.

11-26-2002, 04:56 PM	#6
turbo240sx Zilvia Member Join Date: Oct 2002 Location: CT Posts: 166 Trader Rating: (0)	your not the only one that had this problem. the easiest way i did it was drain the fluid. turn it upside down and the pull out while pushing up too. you need 2 people. the starter hump on the bell housing wont clear the underside of the body on an s-13 if you pull it out in the upright position. its a pain in the ass. wait till you put it back in its even more fun. do it the same way, good luck. __________________ 240sx s-13 TURBO weekend v-8 killer 90 Talon TSI WARNING.THIS CAR IS EQUIPPED WITH A TURBOCHARGER. DUE TO POSSIBLE BREATHING PROBLEMS UNDER HEAVY ACCELERATION, ALL FEMALES ARE ADVISED TO REMOVE ANY TIGHT FITTING OR RESTRICTIVE CLOTHING FOR SAFETY.