Quote:
Pin 1 - for now don't connect this pin.
Pin 2 - connect this pin to ground to be safe.
Pin 3 - connect this pin to the Black/White and Black/Yellow wires on the ignition switch harness.
Pin 4 - connect this pin to the White wire on the ignition switch harness.
|
Ok i'll try this tomarrow, but if black and whit and black and yellow are connected won't the car crank anytime the key is in the on position?
Shouldn't it be black/white and white on the same connector? and black/yellow on it's own since that's what I'm trying to send the power too?
Thanks for all the help, i really appreciate it