Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - brake fitting help

pacefarm · 12-18-2007, 08:32 AM

monin'

i need some help finding a fitting for the 300z brake master cylinder.

i'm running a boost-designs manifold with a t3/t04e.. when trying to test fit the 300z BMC, i noticed that the brake lines would definately have some clearance issues. i'm already running a non-abs brake booster, so there's nowhere to go.

what i'm looking for is a 90 degree fitting, that would re-direct the brake lines straight down, instead of out towards the block. the fitting should be m10x1.00 male to female 90 degrees, inverted flare.

i tried searching, but no luck. if anyone could recommend a place that would carry this kind of fitting, i'd greatly appreciat it!!

12-18-2007, 08:32 AM	#1
pacefarm Zilvia Member Join Date: Dec 2003 Location: RO, MI Age: 45 Posts: 183 Trader Rating: (0)	brake fitting help - 300zx bmc 90 degree fitting monin' i need some help finding a fitting for the 300z brake master cylinder. i'm running a boost-designs manifold with a t3/t04e.. when trying to test fit the 300z BMC, i noticed that the brake lines would definately have some clearance issues. i'm already running a non-abs brake booster, so there's nowhere to go. what i'm looking for is a 90 degree fitting, that would re-direct the brake lines straight down, instead of out towards the block. the fitting should be m10x1.00 male to female 90 degrees, inverted flare. i tried searching, but no luck. if anyone could recommend a place that would carry this kind of fitting, i'd greatly appreciat it!!