Alright so I wanted to hook up my air/fuel ratio gauge and boost gauge to the same power source, so what I did was solder the power line from the boost gauge and the power from the air fuel ratio together, than spliced those 2 onto a in-line fuse connector with 5 amps. I just want to make sure that I can do this because the different thicknesses of the wires scare me lol , or if not, how can I do it? I also soldered the grounds together and spliced another cable to those 2 to make one ground.
The red and the white wires are the wires that need 12V. The orange one is the fuse holder.
