Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

brage · 12-26-2002, 10:30 PM

Okay, so I am going to be pulling the KA24DE and the tranny from my wrecked 1996 240sx parts car to go into my 1995 with a blown motor... My question is is it possible to pull the motor and transmission as one piece (is there enough room?) The FSM states that you must remove the transmission first - and I was wondering if anyone has pulled the motor without removing the tranny...

-Jeff

12-26-2002, 10:30 PM	#1
brage Zilvia Member Join Date: Oct 2002 Location: Tempe, AZ Posts: 181 Trader Rating: (0)	Pulling KA / KA+Tranny Okay, so I am going to be pulling the KA24DE and the tranny from my wrecked 1996 240sx parts car to go into my 1995 with a blown motor... My question is is it possible to pull the motor and transmission as one piece (is there enough room?) The FSM states that you must remove the transmission first - and I was wondering if anyone has pulled the motor without removing the tranny... -Jeff