|
Depends on your setup and how much money/work you want to put into it. If you're running factory speakers, don't bother. That much more juice than the deck puts out will wear them real quick. For aftermarket speakers, just find a home for your amp, then you have two choices on wiring. First off, if you're lazy, just pull the signal wires from the amp to the factory speaker wires behind the deck. Hook em up and go. Ideally, you'd get off yer lazy ass and run the wires all the way to the back of the speakers. A continuous wire will not only be bigger (hopefully), but will have less signal attenuation as splicing into the factory wires, where you'll get signal reflection, power loss, and all sorts of non-good stuff.
As far as hooking up the amp goes, that's reserved for "Wiring Basics 102"
|