View Single Post
Old 12-31-2002, 08:01 AM   #3
Dousan_PG
Post Whore!
 
Dousan_PG's Avatar
 
Join Date: May 2002
Location: Orange County, California
Age: 46
Posts: 16,640
Trader Rating: (23)
Dousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfectionDousan_PG is close to perfection
you can fit 8s in front and 9s in back w/o neg camber i believe

you can fit 9s up front and 10s in back w/ neg camber as well

all depends on:
spoke design
offset
coilovers
brakes

for clearance issues. eahc wheel is different, therefore an offset on one wheel wont clear same as another

as far as simple
you can go 7" wheel +10 offset and that will clear coilovers but NOT z brakes, BUT it will be extremely (just about perfectly) flush with fender.

that's how my friends 15x7 +10 and +12 mesh was. the 10 was most flush with fender. also depends what tires you use and how wide the tire is.

so many "if"
__________________
Aaron
Pink GodziRa
www.geocities.com/pink_godzira
Dousan_PG is offline   Reply With Quote