Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

*DSC* · 11-24-2001, 09:40 AM

I know I know its been done before. but I was reading an eibach FAQ and it said I could safely use it with the stock shocks. Is there risk of blowing stock shocks with a 1.7/1.4 drop? Even if there isn't, would I be better off buying aftermarket shocks anyway? If so, are eibach shocks any good? It would make since that they would be the best match for the springs. I was also looking at tokico shocks Here would they be good? I don't really care if they are adjustable or not. Another ? will I need a camber kit for a 1.7/1.4 drop? If so, what should I use to correct rear - camber? I know thats a lot of questions, answer what you can.

Edit: 1.2/1 (eibach prokit) isn't enough 2/2 (tanabie) is too much but if you have other springs to recommend please do so. Thanks

(Edited by DSC at 10:43 am on Nov. 24, 2001)

11-24-2001, 09:40 AM	#1
DSC New Title Join Date: Aug 2001 Location: VA Posts: 3,454 Trader Rating: (0)	I know I know its been done before. but I was reading an eibach FAQ and it said I could safely use it with the stock shocks. Is there risk of blowing stock shocks with a 1.7/1.4 drop? Even if there isn't, would I be better off buying aftermarket shocks anyway? If so, are eibach shocks any good? It would make since that they would be the best match for the springs. I was also looking at tokico shocks Here would they be good? I don't really care if they are adjustable or not. Another ? will I need a camber kit for a 1.7/1.4 drop? If so, what should I use to correct rear - camber? I know thats a lot of questions, answer what you can. Edit: 1.2/1 (eibach prokit) isn't enough 2/2 (tanabie) is too much but if you have other springs to recommend please do so. Thanks (Edited by DSC at 10:43 am on Nov. 24, 2001)