Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

robunicu · 02-07-2008, 03:23 PM

hey guys, i've been doing research for the past 2 days on replacing valve steam seals on a 97 ka but had no luck. Im about to buy a ka with suposebly 90k but the seller is telling me the valve steam seals are bad and hes giving me a set. now i've pulled a few motors out and put them back but never opened a motor to do anything inside of it. what all is required to change the valve steam seals. how hard is it and is this any obvious sign that the car was beaten on? i need to know this info by saturday guys. thx. also the motor was from an auto car.

02-07-2008, 03:23 PM	#1
robunicu Leaky Injector Join Date: Jan 2008 Location: Tampa, Florida Age: 36 Posts: 136 Trader Rating: (0)	KA24de Valve Stem Seals replacement hey guys, i've been doing research for the past 2 days on replacing valve steam seals on a 97 ka but had no luck. Im about to buy a ka with suposebly 90k but the seller is telling me the valve steam seals are bad and hes giving me a set. now i've pulled a few motors out and put them back but never opened a motor to do anything inside of it. what all is required to change the valve steam seals. how hard is it and is this any obvious sign that the car was beaten on? i need to know this info by saturday guys. thx. also the motor was from an auto car.