Quote:
Originally Posted by blownmotor
pfc will NOT automatically adjust itself for the larger injectors,try to monitor your knock levels with the commander/datalogit. any knock level above 50 is bad (detonation). You need to know the lag time for the larger injectors and perform the corrections in the injector menu because the base map on pfc are for 370cc.I got my car tuned in about 2 and a half hours. redline deends on where your turbo starts losing effeciency/dropping boost. safest way is to do it on a dyno. either way you are looking at dyno time
|
Well if you read the first part of my post, you would see that I know when you go and setup the pfc in the first place, that you have to go in and enter the injector size correction, which would be .5 for me with the 740s. I'm just asking if that will work with the map from enthalpy or only the preloaded map. I know how to tune based on afr and knock. I'm aiming my post more towards the guys that do alot of tuning, ie griff and shadows.