Quote:
Originally Posted by lazierhobo
check if you are getting voltage or ground coming from pin 24, this is a definitive way to check for the grounding problem.
this will allow you to definitively figure out if its a wiring problem or an ecu problem.
|
pin 24 in the 34pin connector on the Haltech? or the main wiring harness connector?
on the 34 pin connector i am getting 11v at the pin 24 on the 34 pin connector. But pin 10 and 11 is not a ground like it says on the haltech diagram. I had to use the chassis for a ground for the multimeter. Could this be a sign?