|
Fine. Mitsubishi injectors will not fit the ka24DE or sr20det stock fuel rails. Custom rails are in the $120+ range, and any competant shop can make one. Unstable-Hybrids.com makes them, too. If you had a new rail made to accept the injectors, and a harness (or spliced the injectors into your fuel harness), then they will work. You'll also have to run resistors from the ecu injector drivers to change the Denso injectors from low-impedance peak-and-hold injectors to high-impedance saturated injectors. Denso are typically P&H, but running resistors will lose the benefits of that.
In the end... if you customize everything.. you'll be able to run the injectors.
-Jeff
__________________
Whatup?
|