Quote:
Originally Posted by pwhitersxs
The fittings that go into the brake master cylinder are m10x1.0. So I would assume the rest of them are that size. The easiest way to get the fittings is to go to a fittings and hose supply store and present them with your stock fitting and say "give me some of these". OR go to the junkyard and take a bunch out of other nissans.
I know that most nissan's and maybe all use a m10x1.0 for the MC.
That looks like the right one's. I would call if you order those to make sure you get the right ones.
http://store.summitracing.com/partde...5&autoview=sku
Just make sure you get the fitting that is m10x1.0. The fitting is what tightens down the flare to create the seal. If you are redoing your lines, make sure you do a proper bubble flare. |
Yeah, I've been doing research on it all night. I know the flares are a 10mm head. What is the difference between a bubble flare and a compression fitting. I know compression fittings are a no no for brake lines.