|
I found a mount on a Honda forum, can't remember which one, but the guy used two pieces of square aluminum stock which you can get at lowes or home depot. He bolted the two pieces together then drilled a hole directly between them which is where the passenger headreast posts would go. Then he used some rubber tubing at the headrest mounts to kinda dampen the mount and keep it from sliding up and down. Oh, and mind you that one of the peices of stock were longer than the other which he bolted the camera mount to so it sat directly in the middle of the car. I'll try and post the link once I find it. Hope I didn't word this to weird so as to confuse you. Hope this helps.
|