|
Depends. Sometimes the crank angle sensor (equivelent of the ka distributor) will get jarred or messed with during shipping. If that's the case then yes you'll need to time the motor.
However most of the time it doesn't. Once you put the motor in you won't need to chance the timming whatsoever. Just make sure you always put high octane fuel in the car. Just as a precautionary measure.
If you do need to hook up a timming gun hood it up to the first coil pack. 3 wires, I believe the middle wire white/black is the one you need.
G'luck
Jed
|