|
ok so i took the rear end apart again and the spacers had gouges in them. (the front two) so ifigured that the nut was bottoning out before it was as tight as can be on the frame. so i put a couple of washers to take up the slack. the violent shacking is less.(i also made sure the bracket was contacting the spacer fully, a hammer made sure of that.) i dont see how the sub frame could move and shake but maybe? but the shocks i could see those bouncing but im still debating on weather to buy kyb's or tein coil over setup. (rear shocks are probaly blown) i can move the tire when its jacked up like two inches.)
|