Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

bonomo · 04-05-2008, 09:03 AM

this is what i got when i degreed them where they sit stock BC 264 264 correctme if i did it wrong cause im new to timing cams but if im looking at it right there wayyyy off

intk open @.050 =20 deg
intk closed @.050 =49 deg
exh open @.050 =43 deg
exh closed @.050 =14deg

claculate i get

Your cam has an Overlap of 34.00 degrees and has in Intake Duration of 249.00 degrees.
The Exhaust Duration is 235.00 degrees.
The Inlet Cam has an Installed Centerline of 104.50 degrees ATDC.
The exhaust cam has an Installed Centerline of 104.50 degrees BTDC.

04-05-2008, 09:03 AM	#1
bonomo Zilvia Member Join Date: Jan 2004 Location: Va Beach Posts: 234 Trader Rating: (1)	ka24de Cam degreeing this is what i got when i degreed them where they sit stock BC 264 264 correctme if i did it wrong cause im new to timing cams but if im looking at it right there wayyyy off intk open @.050 =20 deg intk closed @.050 =49 deg exh open @.050 =43 deg exh closed @.050 =14deg claculate i get Your cam has an Overlap of 34.00 degrees and has in Intake Duration of 249.00 degrees. The Exhaust Duration is 235.00 degrees. The Inlet Cam has an Installed Centerline of 104.50 degrees ATDC. The exhaust cam has an Installed Centerline of 104.50 degrees BTDC.