Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

jt1583 · 04-17-2008, 05:08 PM

I need to put an exhaust bung in for my wideband sensor.

Current I am thinking of about 8 inches back from the angle where the downpipe goes completely horizantal.

I heard on headers the bung should be 2 inches from exhaust port
But of course this would not be our case
I have though of this spot because it's a good straight in the pipe so hopefully gases would not have abnormal flow.

Also, should the bung itself stick into the exhaust pipe? Meaning, completely penetrate the downpipe wall?

Thanks in advance

collaborate.

04-17-2008, 05:08 PM	#1
jt1583 Zilvia Member Join Date: Jul 2005 Location: Georgia Age: 37 Posts: 264 Trader Rating: (3)	where to place exhaust bung I need to put an exhaust bung in for my wideband sensor. Current I am thinking of about 8 inches back from the angle where the downpipe goes completely horizantal. I heard on headers the bung should be 2 inches from exhaust port But of course this would not be our case I have though of this spot because it's a good straight in the pipe so hopefully gases would not have abnormal flow. Also, should the bung itself stick into the exhaust pipe? Meaning, completely penetrate the downpipe wall? Thanks in advance collaborate.