[koukimonster139]

misinformed much?


dont talk in here if you havent actually painted a car before (*and no not rattle can horseass paintjob) its not orange peel, orange peel happens when you spray clear with too high of pressure, too far away from the panel with the gun or simply not putting enough material on. and, it happens immediately after spraying


what you have is called solvent pop, the solvents in your primer, basecoat etc.. have finally cured after a few days/weeks (depending on if the booth had a bake cycle) and rise to the surface of the clear





it can be easily sanded and buffed, hopefully they didnt pull it straight out of the booth and sand and buff it after sitting for one day, if so, you probably dont have enough clear left on there to do it again