[Kreator]

Ok... i posted this before but w/o any luck. So i'll try again.

About a month ago i bought a Pivot Turbo Timer. Today i found out that there is no way the HKS harness will work with it. So basicly i need to figure out which wire is what and how do i go about splicing them in. Also, if someone has done hardcore splicing w/o harness, i'd need some instructions... or at least FSM page scans of the ignition setup... but that's not as important right now.

So first of all.... if someone has a Pivot TT instructions somewhere or knows the color coding... plz plz plz post here.

Now, here is what i have coming out and what i'm guessing from tts of other companies:
1. black - ground
2. red - power
3. green - ignition
4. yellow - second ignition (? someone tell me wtf this is)
5. orange - speed sensor (?)
6. blue - accessory (?)
7. grey
8. brown

One of these is supposed to be a parking brake safety feature, but i have no clue.... So any guesses on which one of these 8 is which (as i'm not sure on any single one except the black one) will be appreciated. Thanx