[DC Dan MAX USA]

Originally Posted by deuceforty

damn, got my drain plug and tie rod spacers in today..
AMAZING product +1 for these guys!!!

Originally Posted by Brian

ahem...... yes bring the skid plates over.....
ahem

Originally Posted by philstar

Yeah I think you should definitely bring some more skid plates over.

ok ok ok I'll do it

Originally Posted by DALAZ_68

any price drop if i get all the arms (genII) at teh same time?

not on the product itself but you save a little on shipping doing it all at once.

Originally Posted by 240sxorty

I went and got an alignment and car is so low that with the camber adjusted the Toe gets jacked. (not enough adjustment) Guess what I need. How much for s13 toe rods to 77053 please. Also the E-brake drift knob thingy. BTW the Spacers are awsome. Add color, and allow my +45 300zx rims to fit and look really good. (Baller on a budget.)

**Everyone** should pay attention to this phenomenon-
Everybody gets coilovers and then they look at the rear wheels and say oh man I need to correct the camber
And then if they get an alignment they find the toe is f'ed up, or if they have 18x10's they can see the toe is f'ed up
but if someone has sunk 15's or 16's they go about driving the car never knowing they have f'ed up toe.
So the bottom line is you really have to get camber and toe rods at the same time because on s-chassis' when you change the camber you are changing the toe as well. I dont think too many people know this because I sell 10x more camber than toe rods.
$227.25 Thanks!

Originally Posted by Cash

Does shipping always take 10+ days or am I just one of the few lucky ones?

It never takes that long, have you been tracking it? Email me if you need the T# again.

Originally Posted by firm tofu

the prices are already low as is for a good product, and im sure Dan is going to say the same thing.

Ya thats what I always say.

Originally Posted by imotion s14

whats the size of the fittings on the oil cooler?

-10an

Originally Posted by scribbles6

i drove on my new PBM coilovers today at the track, they were awesome, i love them, thanks Dan, i got everything on time and was able to install and set up just on time before the track event and i had a blast out there today, i'll post a couple of pics tomorrow

sweet

Originally Posted by bryce with a y

got parts last week.
good stuff. but think you should use dumbie boxs to ship the coilovers in... when the ups man deliveried it, the box was like half open still from when you put in the other parts in there... luckily i got everything.

? UPS is pretty gay about chucking the boxes on the ground, thats why I insure everything - On the other hand they have not lost a single part yet.