I can't verify this, but here it is.
Quote:
A leak in a SSQV or an I/C pipe will limit the amount of boost pressure
and should have nothing to do with the engine RPM level. If the valve
is
leaking, adjust the bolt on the back of the valve (1/8 of a turn at a
time) clockwise and check that the o-ring is seated properly and c-clip
is
has the flat side facing down. Do not take the SSQV apart; it will void
any type of warranty. If there is problem, send it in through the
dealer
it was purchased from.
Sincerely,
HKS USA Technical Support
http://www.hksusa.com/FAQ/
|