how did you check if your ignitor chip is working??? it sounds like ignitor chip to me. Also double check your CAS is it in the right place lined up properly timing wise. You need to take the valve cover off and check if it is lined up with the mark on the tip of the cas gear. There are two lines a orange one and a metalic indentation they need to be lined up go to
www.srswap.com to FAQ and check CAS section it has a good description of what to look for. Also if you have any buddies with srs try using one of their ignitor chips and see if it fires. Also is the little red led light on the ecu lighting up if not your not getting ecu power. check these things out and then come back