Quote:
Originally Posted by whereda40at
do you have pix of this? i want to see how you did it. i might have to do this. i also have a t-5 trans
|
I don't have pix of this right now, but there's no real need for pix.
If you look where the back of the clutch pedal is, on the back there is a stopper bolt. The stopper bolt is bolted onto the clutch pedal bracket. So even if you removed the bolt and let the clutch pedal extend completely, the pedal will hit the bracket.
All I did was cut off the bracket and let the clutch pedal extend as far as the spring and master cylinder will let it go. There really wasn't any other way to reuse the stock master and have enough fluid be pushed to move the T5 slave with the stock pedal travel.