Quote:
Originally Posted by uthemofo
naw you cant just press them, some of them you can but these rubber stupid ones you gotta hole saw the rubber out of it, cut the metal sleeve with a saw(this takes the pressure off the metal sleeve) then you can hit it out with a hammer and a socket. I had to do this when i put in the energy bushings in my car.
|
You're crazy too, I've pressed out over a dozen sets of bushings from Z32 uprights. They're easier since the steel outer shell doesn't seize to the aluminum. The S13/S14 uprights being steel are more work since the steel will corrode and seize, but these are simple. I've never had to use anything but sockets.