Quote:
Originally Posted by jinesz32
i am almost sure your turbo seals are blown, i installed my t25 that i bought, and i thought it was fine, there was shaft play but mininal. installed it and smoke came out right away, on first startup it was running rich, then tuned it properly and it ran fine. but i couldnt drive it, when it boost a little the car stalls and turns off, i removed the turbo, and found out there was oil everywhere in the turbo elbow, since i dont have my downpipe or exhaust on, and i removed the turbo inlet and outlet and there was oil in the turbo, and the shaftplay went crazy, now theres in and out, and side to side play. wow? i took the turbo off, borrowed a friends turbo with the same setup, and it ran fine, i can fully boost and run the car now. i still dont have my downpipe or exhaust on, i need to bring it to an exhaust shop. =/
well heres a video of my car smoking. i hope that helped =P
http://www.youtube.com/watch?v=Bpl-An0wA8Y |
Thank you so much for the info! Now, I have a question, my wastegate is external, and I think that the wastegate comes internally. So How would I know how to block it off so I can use my external wastegate?
ok. So I need to get a new turbo, I am pretty sure that is my problem, It smokes from the same place from the engine. But my exhaust smokes white as well. Same thing, close to the turbo. Between the turbo hotside and the downpipe. so want to change it, but even if I change it, How would I change the wastegate?
Need help >.<