|
just ran the clicking test suggested on the cas. I did this with one coilpack out to check fuel injector firing and coilpack firing. While manually turning the cas with power to my distribution block switched on I got spark and the injectors fired, with fuel pump still off of course. GREAT! Then I put everything back together and pushed the start button but it wouldn't start. I pulled the plug back out and no spark or fuel again. I think I must have something wired wrong so that when I actually press the start button and starter solenoid etc get power something is wrong. Someone mentioned that some wire is supposed to get power in the on position but not the start position. Does anyone know what this is? Thanks,
JKP
|