Quote:
Originally posted by Jeff240sx
Caster can't be changed. Camber specs are like -1.6* to -2.5*. My camber was at -4* and it ate a set of tires in 6000 miles. I'd say that -2.5* for daily driving is about all you'd need.
-Jeff
|
TC rod length will change caster. If you've got a busted TC rod bushing you'll know it when they check the caster, but there should be a small amount of "play" on the lower arm mount where the TC rod attaches to allow a small bit of adjustment, i think.
Factory spec for front camber is 0 to -1deg 30'
Rear is -1deg 40' to 0deg 40'