Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - FMU, BOV for ka24e-t

litlespic · 03-12-2003, 08:55 AM

I will be running hte first gen DSM... I got it from a junkyard.. brought it home and did 2 simple mod's to it so it will hold more than 17psi.. here is the link for it.. quite simple.. good luck

http://www.thedodgegarage.com/turbo_bov_mod.html

It cost me about 8 bucks for all the bits, taps, and die's... but like the site says.. if you dont plan to run more than 17psi you should be fine with the stock unit.. Just a little idea I use, dont say you got it off a dsm, and say it is a egr valve.. might help with payment of the BOV...???

03-12-2003, 08:55 AM	#3
litlespic Leaky Injector Join Date: Jan 2003 Location: Chesapeake, VA Age: 40 Posts: 55 Trader Rating: (0)	I will be running hte first gen DSM... I got it from a junkyard.. brought it home and did 2 simple mod's to it so it will hold more than 17psi.. here is the link for it.. quite simple.. good luck http://www.thedodgegarage.com/turbo_bov_mod.html It cost me about 8 bucks for all the bits, taps, and die's... but like the site says.. if you dont plan to run more than 17psi you should be fine with the stock unit.. Just a little idea I use, dont say you got it off a dsm, and say it is a egr valve.. might help with payment of the BOV...??? __________________ 88 Merkur, just a little 2.3