Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

opponheimer · 07-08-2008, 10:26 PM

Installed a 3.8l taurus fan, wired the high setting with a 50A relay. The post #30 on the relay (terminal that goes straight to the fan power) gets really hot, and it has a good soldered connection, to the power wire.

Is it normal for relays to get hot? should i get thicker gauged wires?

I tried wiring the high setting before on a stock nissan relay and the same problem happened, the exact same post started to overheat.

What the hell.

07-08-2008, 10:26 PM	#1
opponheimer Zilvia FREAK! Join Date: Apr 2007 Location: Bikini Atoll Posts: 1,267 Trader Rating: (3)	Electric fan wiring issue Installed a 3.8l taurus fan, wired the high setting with a 50A relay. The post #30 on the relay (terminal that goes straight to the fan power) gets really hot, and it has a good soldered connection, to the power wire. Is it normal for relays to get hot? should i get thicker gauged wires? I tried wiring the high setting before on a stock nissan relay and the same problem happened, the exact same post started to overheat. What the hell.