|
I put these in last August and had a lot of fun with them, haha. If you need anymore help, pm me and ill get you whatever you need from my setup. As for the pins on the connectors, if you pull apart the stock clips and use a needle or surgery probe to remove the original wired pins, you can get stock toyota clips that the pins snap right into and they work with Sard injectors. check it out at a junkyard, its the cleanest way to wire them because you avoid splicing and such. I didn't do this and my wiring is kind of haggard because of it.
Yes, you did the oring thing right. The sards are the wrong size. You need the oem nissan ones. I'm not sure as to collar orientation but if you need it I'll check it out.
|