Quote:
Originally Posted by projectRDM
It's a 1.25 pitch, but I don't recall the size. M14 sounds too large but it may be it.
You cannot use S13/Z32 Aarms on an S14 unless you use a stack of washers, the mounting staunches on the subframe are wider. The S14 Aarm works fine with no issue, just use the corresponding Z32 hardware.
|
Or install Enery suspension LCA bushings for a S14 on the S13/Z32 LCA, this is exactly the opposite I had to do on my J30 LCA onto my S13.
and since I know taht the J30 LCA part that bolts to the sub-frame is the same as the S14 those bushing would work.....but the catch is the J30 uses a ball joint that bigger than the s13/z32 so it wont work.