Quote:
Originally Posted by devonkyle77
thanks russ. i know the amplifier is right behind the ASCD actuator, beside the wiper motor. that is in the corner on the passenger side behind the strut tower, correct?
also, i am using the trans harness from my ka. would that mean i should/could still use the lower harness to ecu plug?
|
There's no point. The lower harness doesn't have to be repinned, the alternator, starter, and all switches are the same and plug in the same. The plug in question is wrapped into the lower harness but can be removed just by unwrapping it, it
only goes to the CPS and rear O2, neither of which are found on the SR, and neither of which are even required on a KA unless you want to clear the CEL. Both items are for OBD diagnostics only.