I have an s13 so all of my steps will be for that model:
1. Unscrew the shift knob (righty tighty, lefty loosey)
2. Take off the center console cover (it just pops off)
3. Now you will see the rubber boot. It is held in by four 10mm bolts. remove thouse
4. Slide boot up the shifter (it may get stuck on the shift lever just use WD40 to get it off
5. There is a second smaller boot that goes around the base of the shifter. Just peel it back to reveal the shifter seat.
6. Now you can add tranny fluid to the shifter
Use 75w 90 tranny fluid to lube.
Any further questions just PM me. Or post. Or whatever makes you feel good.
FYI Chilton's Manuals will be your best friend
__________________
'91 hatch w/ SR Sold; '03 Evo Sold 401 HP; '03 MS Protege sold; '00 Evo 6.5 TME Sold 300HP
|