Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

seanc · 10-13-2008, 11:33 PM

ok i swapped my ka-t calum, 650's and everything into another shell. ok now the car will not start on its own. it will start when you spray some starting fluid into it. and idle and purr and run perfect. the car is getting plenty of spark. now i think the problem lies in the fact that the injectors are not getting the grounding signal from the ecu during start up. they do have 12 volts on the red wire but only get the grounding signal after it has started. no codes. any ideas?

10-13-2008, 11:33 PM	#1
seanc Leaky Injector Join Date: Nov 2005 Location: Lake Stevens, Wa Posts: 66 Trader Rating: (0)	ka starting problem ok i swapped my ka-t calum, 650's and everything into another shell. ok now the car will not start on its own. it will start when you spray some starting fluid into it. and idle and purr and run perfect. the car is getting plenty of spark. now i think the problem lies in the fact that the injectors are not getting the grounding signal from the ecu during start up. they do have 12 volts on the red wire but only get the grounding signal after it has started. no codes. any ideas? __________________ Looking For A Holset HX 35