Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Z32

Rittmeister · 11-13-2008, 05:39 PM

Tried McMaster-Carr, nutsandbolts.com, etc. No one seems to have the right bolt with the 14mm head. I can get the bolt with a 17mm head all day long, anywhere.

I just bought some at the hardware; I'll use them at the ends of the caliper where the head size doesn't matter, and use the stockers in the inboard positions. I don't see another choice really; I'd hit a junkyard but Z and S chassis are pretty thin on the ground in my area, it would be futile.

11-13-2008, 05:39 PM	#11
Rittmeister Zilvia FREAK! Join Date: Jan 2003 Location: Cincinnati OH Age: 48 Posts: 1,033 Trader Rating: (9)	Tried McMaster-Carr, nutsandbolts.com, etc. No one seems to have the right bolt with the 14mm head. I can get the bolt with a 17mm head all day long, anywhere. I just bought some at the hardware; I'll use them at the ends of the caliper where the head size doesn't matter, and use the stockers in the inboard positions. I don't see another choice really; I'd hit a junkyard but Z and S chassis are pretty thin on the ground in my area, it would be futile. __________________ E36 M3 - new project 1990 240SR - screamed down the road