Quote:
Originally Posted by Flybert
You only put teflon on the pipe thread going into the turbo. AN is designed so you don't have to put teflon on there. You're setup is more likely to leak that way.
|
Don't give advice unless you know what you're talking about - the thread going into the turbo on the water jacket is M14x1.5mm - NOT a pipe thread, or even the same type of thread.
Teflon belongs on NO part of the turbo plumbing setup. They are all parallel threads, and the sealing is not done by the threads. AN fittings seal on the 37 degree flare, not on the threads. Putting teflon tape on any of them is a joke...