Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Too many hoses not enough fittings!!! And vice versa (AND TRUST ME I SEARHED)

sbanzer123 · 12-10-2008, 08:45 PM

nipple on the turbo is a boost source that you will attach your mbc and wastegate to. take a vacume line from your wastegate to your mbc then to the nipple on your turbo. then take the t for your boost gauge and put it in between the nipple that your fuel pressure regulator goes to. so you will go fpr, t, one side of the t goes to your boost gauge and the other side goes back to the nipple on the intake mani that it came off of. hope that helps.

12-10-2008, 08:45 PM	#9
sbanzer123 Zilvia Junkie Join Date: Aug 2006 Location: Buffalo, NY Age: 36 Posts: 534 Trader Rating: (6)	nipple on the turbo is a boost source that you will attach your mbc and wastegate to. take a vacume line from your wastegate to your mbc then to the nipple on your turbo. then take the t for your boost gauge and put it in between the nipple that your fuel pressure regulator goes to. so you will go fpr, t, one side of the t goes to your boost gauge and the other side goes back to the nipple on the intake mani that it came off of. hope that helps.