Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

kid270r · 12-21-2008, 02:01 AM

thats what i was wondering.. see the thing is, he had the motor runing on a Z (cant remember the model) with this setup. car got cliped from the rear. i saw the tranny and it actualy justified to what he said. im doing some research right now to see if this is possible..

edit:
its true... i found this on the skylinesdownunder forums...thanks for trying to help.

KA24DE (E) tranny will fit RB20 Bell housing, and if you have a bad RB20 tranny and not enough money for the RB25 tranny, you can take the KA tranny rear section off..the tranny internals...and directly swap them into the RB bell housing. KA tranny will work and makes for a cheap solution to tranny swaps...

12-21-2008, 02:01 AM	#4
kid270r Join Date: Nov 2008 Location: texas Age: 41 Posts: 27 Trader Rating: (0)	thats what i was wondering.. see the thing is, he had the motor runing on a Z (cant remember the model) with this setup. car got cliped from the rear. i saw the tranny and it actualy justified to what he said. im doing some research right now to see if this is possible.. edit: its true... i found this on the skylinesdownunder forums...thanks for trying to help. KA24DE (E) tranny will fit RB20 Bell housing, and if you have a bad RB20 tranny and not enough money for the RB25 tranny, you can take the KA tranny rear section off..the tranny internals...and directly swap them into the RB bell housing. KA tranny will work and makes for a cheap solution to tranny swaps...